Acceptance criteria for wall stone and wall tiles

1. The surface should be smooth, clean, consistent in color, free of cracks and defects;


2. There should be no pollution such as efflorescence on the surface of the stone;


3. The caulking should be dense and straight, and the filling material should be consistent with the color;


4. Paste must be firm.



Acceptance criteria for wall soft packs


1. The keel, liner and frame of the soft package project should be installed firmly without warping, and the seams should be straight;


2. There should be no seams in a single piece of soft bag fabric, and the surrounding should be stretched tightly.


Acceptance criteria for wall paper


1. The surface of the pasted wallpaper and wall covering should be flat, the color should be consistent, there should be no ripples, bubbles, cracks, wrinkles and stains, and there should be no glue marks when squinting;


2. Wallpapers, wall coverings and various decorative lines and equipment line boxes should be handed over tightly;


3. The edges of wallpapers and wall coverings should be straight and tidy, without paper wool or flying thorns;


4. The overlapping joints at the inner corners of wallpaper and wall coverings should be smooth, and there should be no seams at the outer corners;


5. The quality requirements and acceptance methods of pasted wallpaper shall comply with the provisions in Table 1-8.

评论

此博客中的热门博文

Six reasons why SPC flooring has become a new favorite

Do you know these advantages and disadvantages of stone-plastic flooring?